TS 840 – Agricultural Applications

UL 1008/ CSA 178 Certified, 100-800 AMP Single & 3 Phase 240V Max
  • Rugged, economical solution for the harsh environments of the agricultural industry.
  • Available from 100 amp – 800 amp single and 3 phase 240 volt.
  • Options include Service Entrance rated and Load Distribution.
  • Easy to use TSC 80 ATS controller requires no software programming.
  • UL 1008 listed.

$2,500.00

Features

 

 Amperage Range  100A – 800A
 Voltage Range:  120/240V or 120/208V
 Poles:  2 or 3
 Frequency:  50/60Hz
 Power Distribution:  Single Phase, 3 wire or 3 Phase, 4 wire
 Controller:  TSC 80
 Standard Enclosure:  Nema 3R SD (100 – 600A), NEMA 3R DD (800A)
 Safety Standard:  UL 1008 , CSA C22.2 No. 178
 Quality Assurance:  ISO 9001 Registered
 Warranty:  2 Year

 

STANDARD FEATURES:

• Load on Utility & Load on Generator Lights
• Utility & Generator Source Available Lights
• Three Phase Voltage Sensing on Utility & Generator Sources
• Under Frequency Sensor on Generator Source
• Engine Start Delay Timer 0-60 sec.
• Engine Cooldown Delay Timer 0-30 min.
• Engine Warm-up Timer 0-60 sec.
• Neutral Position Delay 0-60 sec.
• Utility Return Timer 0-30 min.
• Engine Start Contact (10A, 120/240VAC res. Form B)
• Exercise Timer (On or Off Load, Fixed 30 min.)
• Auxiliary Contact – Utility side (10A, 120/240VAC res. Qty 1, Form C)
• Auxiliary Contact – Generator side (10A, 120/240VAC res. Qty 1, Form C)
• Local Utility Power Fail Simulation Test Pushbutton
• Provision for Remote Load Test/Peak Shave Switch Input
• NEMA 3R Enclosure
• Solid Neutral
• Storage Temperature: -20oC to 70oC (-4oF to 158oF)
• Operating Temperature: -40oC to 50oC (-40oF to 122oF)
• Humidity: 95% non-condensing, maximum

 

Options

OPTIONAL FEATURES: (Specify separately from ATS MODEL CODE when ordering)

CODE    DESCRIPTIONS
Dist2     2 Load Distribution Breakers (Qty 2, 200A, 2 Pole Only)
Dist4     4 Load Distribution Breakers (Qty 4, 200A, 2 Pole Only)
Dist6     6 Load Distribution Breakers (Qty 6, 200A, 2 Pole Only)
SDM       LCD Service Display Module
– Displays TSC 80 Controller Settings and Timer Adjustments
– Plug in Connector and Cable
TS-H1    Enclosure Strip Heater c/w Thermostat (120VAC External Power Source Required)
TS-H2    Enclosure Strip Heater c/w Thermostat (Internally Powered from ATS Load)

Resources

TS 840 Brochure

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

PowerOn Logo